|
Specifications
SeaChanger employs four patterned filters — cyan, yellow, magenta and a special green filter – in a 7.0" x 11.5" module that weighs less than 12 pounds. The SeaChanger unit is designed to fit the ETC Source Four® ERS and allows users to configure filters in millions of combinations to create a nearly infinite variety of colors. SeaChanger’s high-saturation “Extreme Green” color wheel generates deeper greens, reds and blues than typically available with dichroic color filters. The entire unit is self-contained with an internal power supply and 4-channel DMX control. SeaChanger also supports the Remote Device Management (RDM) protocol and can be programmed for stand-alone operation.
| CAD Files: |
SeaChanger Spot (.DWG)
SeaChanger Spot (.DXF)
SeaChanger Wash (.DWG)
SeaChanger Wash (.DXF)
|
|
Size/weight:
|
7.0” x 11.5”, 12 lb. |
| Ambient temperature: |
113 °F (45 °C) maximum |
| Power input: |
110-250 VAC, 50/60 Hz, auto-sensing, non-dimmed circuit |
| Power supply: |
Onboard, internal 5V, 50 W switching mode PS |
| Control: |
8-bit DMX512 5-pin male and female XLR;
RDM device per ANSI E1.20-2006;
Front panel membrane keypad with LED numeric display
|
| Channels: |
DMX start address set via RDM or onboard display:
Channel 1 -- Cyan, 0-95% saturation
Channel 2 -- Magenta, 0-95% saturation Channel 3 -- Yellow, 0-95% saturation
Channel 4 -- Standard xG (RGB) filter, 0-99% saturation
Channel 4 -- Optional patterned Al douser, 0-99% dimming
Channel 4 -- Optional custom dichroic filter |
| Color mapping: |
Nearly infinite color mapping within a gamut of the CIE triangulated color space; gamut extended with xG (RGB) filter |
| Speed: |
Less than 1 second average from clear to full saturation |
| Beam characteristics: |
Preserves all ETC Source Four Ellipsoidal beam characteristics |
| Accessory compatibility: |
All beam-shaping ETC Source Four accessories such as Enhanced Definition Lens Tubes (EDLT), Source Four Zooms, gobos, gobo rotators, gobo changers, field-of-view barrels (10°, 14°, 26°, 36°, 50°, 70° and 90°), and other devices |
| Lamp comptability: |
575 W or 750 W HPL lamps; can be used with Source Four HID fixtures |
| White light output: |
9,500 lumens total system output (SeaChanger + 26° Source Four with 750 W HPL lamp) |
| Color filters: |
Dichroic patterned CYM and xG (RGB) coatings on optical glass substrates, BBAR-coated, in-band transmission >98% |
| Mounting: |
Suspension on Source Four Ellipsoidal yoke from mounting points;
Bayonet mount to fixture;
Adaptable to Source Four tungsten or HID fixtures
|
| Maintenance: |
Easy-out color engine removal for cleaning; safety cable ring; 3' safety cable included |
Source Four is a registered trademark of Electronic Theatre Controls, Inc. (ETC). Neither Ocean Optics nor the SeaChanger Color Engine is affiliated with ETC.
|
